ZRX PVC Leather Car Seat Gap Filler with Cup and Phone Holder — a padded PVC leather filler that drops into the gap between the seat and the centre console — the slot where phones, keys, coins and cards disappear, never to be seen again. It closes that gap and adds a small storage tray plus a cup and phone slot within reach of the driver.
Why it is worth fitting
The gap between the seat and the console is a design flaw that every car has. Drop anything smaller than a hand in there and it is gone, sometimes permanently, since in many cars the gap leads into the seat frame, where a phone wedges out of reach. Recovering a phone from that position usually means moving the seat all the way forward and back and hoping, and a credit card that slides in can end up stuck in the seat mechanism. This filler closes the gap so nothing can fall through. The pocket adds something back: phones, keys, cards and coins sit within reach rather than in the door pocket behind your shoulder, and the extra cup and phone slot on the console edge makes use of the space that the gap was wasting.
Key features
- Closes the seat-to-console gap so phones, keys, coins and cards cannot fall through
- Soft PVC leather with a padded interior, so it does not rattle or squeak
- Built-in tray keeps phone, cards, coins and keys within reach of the driver
- Additional cup and phone slot on the console edge
- Fits most cars without tools, adhesive or modification
- Leather-look finish that matches a modern interior rather than looking like an accessory
- Seat still slides freely — the filler moves with the console side, not the seat rails
- Padded construction means nothing hard sits against your hip or thigh
Specifications
| Brand | ZRX |
|---|---|
| Model number | zrx-06 |
| Type | Seat gap filler with cup holder |
| Material | PVC leather |
| Style | Luxury |
| Mounting | Slots into the seat-to-console gap, no tools required |
| Storage provided | Tray plus cup and phone slot |
| Colour | Black |
| Country of origin | Guangdong, China |
Will it fit?
Universal in principle, but the width of the gap between the seat and the console varies considerably between models — from almost nothing on some cars to several centimetres on others. Measure the gap width before ordering; if it is unusually wide or narrow, tell us the dimension and the correct filler thickness will be confirmed. Also check that the seat does not need the full width of the gap to slide, and on cars with a manual handbrake confirm the filler does not obstruct it.
Fitting and first use
Slide the seat fully back, then press the filler down into the gap between the seat cushion and the console. It should sit close enough that nothing can pass on either side, and low enough that it does not interfere with the seat belt buckle or the seat’s adjustment lever. Move the seat forwards and back through its full travel to confirm the filler does not jam or pull out. Put the phone and cup slots where your hand naturally falls when you reach down, and check the cup slot is clear of the gear lever through its whole movement.
Care and maintenance
Wipe with a damp cloth and a little mild soap; PVC leather should not be cleaned with solvent-based products, which dry the surface and cause it to crack. Vacuum the tray regularly, because grit left in the base will scratch a phone screen or a watch glass. Keep the tray free of anything heavy, as the padded structure is designed to hold small items rather than tools. If the surface becomes shiny, use a matt leather conditioner rather than a glossy one, which makes items slide.
Frequently asked questions
Will it fit my car?
That depends on the gap width, which varies between models. Measure the gap between the seat and the console and tell us the figure, and the correct thickness will be confirmed.
Does it stop the seat moving?
No. The filler sits on the console side of the gap rather than on the seat rails, and the seat should still slide through its full range. Check this after fitting.
Does it interfere with the handbrake?
On cars with a manual handbrake lever beside the console, check that the filler position leaves the lever fully clear before you settle on the placement.
Can a passenger seat version be fitted too?
Yes, and it is worth doing both sides — the passenger gap is the one where items are most often dropped and least often noticed.
SKU: AP-022 | Category: Car Seat Gap Filler
Delivery is a flat €12 per order. See our Returns & Exchanges page for delivery times, your 14-day right of withdrawal and the 2-year legal guarantee of conformity.
Reviews
There are no reviews yet.